: us@alleducare.com, all_educare@windowslive.com
: 097-9456914,089-6546292,082-8919553
Shure SLX14 WB98H-C
รหัสสินค้า : SLX14/WB98H-C

Shure SLX14 WB98H-C

ราคาปกติ : 47,700 บาท

ลดเหลือ : 26,900 บาท

Shure SLX14 WB98H-C

Shure SLX14/WB98H-C ชุดไมค์ลอยเดี่ยวสำหรับ แซ็กโซโฟน Instrument Wireless  Microphones UHF ไมโครโฟนจับเสียง แซ็กโซโฟน


Shure SLX14/WB98H-C  ชุดไมค์ลอยเดี่ยวสำหรับ แซ็กโซโฟน

SLX14 ประกอบด้วย SLX4 Diversity Receiver 1 เครื่อง และ SLX1 Bodypack Transmitter 1 ตัว

SLX1 Bodypack Transmitter

The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo.

  • Automatic Transmitter Setup
  • Backlit LCD with timeout feature
  • Frequency and power lockout
  • 3-segment battery fuel gauge
  • 2 AA batteries (included) provide 8 hours continuous use
  • 470 - 782 MHz operating range
  • Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")

SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.


  • Audio Input Level 
    -10 dBV maximum at mic gain position 
    +10 dBV maximum at 0 dB gain position 
    +20 dBV maximum at -10 dB gain position
  • Gain Adjustment Range 
  • Input Impedance 
    1 megohm
  • RF Transmitter Output 
    30 mW maximum (dependent on applicable country regulations) Dimensions 
    108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
  • Weight 
    81 grams (3 oz.) without batteries
  • Housing 
    Molded ABS case
  • Power Requirements 
    2 AA size alkaline or rechargeable batteries
  • Battery Life 
    >8 hours (alkaline)

SLX4 Diversity Receiver

Available Options
SLX4 Diversity Receiver 
SLX4L Diversity Receiver w/ Logic Output

The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.

With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890. 


SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • 960 Selectable frequencies across 24 MHz bandwidth
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • RF presence LED
  • 5-segment audio meter
  • Multi-function, backlit LCD
  • Low battery indicator
  • Frequency and power lockout
  • Rugged metal chassis
  • Volume control on rear of unit
  • 1/2 rack design
  • Furnished rack hardware
  • Non-slip bumpers for use out of rack
  • XLR and 1/4" outputs
  • Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)


  • Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
    XLR connector (into 600 Ohm load): –13 dBV 
    1/4 inch connector (into 3000 Ohm load): –2 dBV
  • Output Impedance 
    XLR connector: 200 Ohms 
    1/4 inch connector: 1 kilohm
  • XLR output 
    Impedance balanced 
    Pin 1: Ground (cable shield) 
    Pin 2: Audio 
    Pin 3: No Audio
  • Sensitivity 
    -105 dBm for 12 dB SINAD, typical
  • Image Rejection 
    >70 dB, typical
  • Power Requirements 
    12 to 18 Vdc at 150 mA, supplied by external power supply
  • Dimensions 
    42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
  • Weight 
    816 g (1 lb. 13 oz.)
  • Housing 
    Galvanized steel


WB98H/C Instrument Microphone


The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Condenser (electret bias)
Frequency Response
20 to 20,000 Hz
(measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)
Polar Pattern
Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
Output Level (at 1,000 Hz)
Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical
*1 Pa = 94 dB SPL
Maximum SPL
(20 Hz to 20 kHz, less than 1% THD)
2.5 kilohm load: 160 dB
1 kilohm load: 156 dB
Preamplifier Output Clipping Level
(20 Hz to 20 kHz, less than 1% THD)
2.5 kilohm load: + 6 dBV (2.0 V)
1 kilohm load: + 2 dBV (1.26 V)
Dynamic Range
(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)
125 dB (max SPL minus A-weighted noise)
Output Noise
35 dB SPL, A-weighted


Signal-to-Noise Ratio
59 dB re 94 dB SPL
Output Impedance
Rated at 150 ohms (actual)
Recommended minimum load impedance: 1 kilohm
Hum Pickup
-7.5 dB equivalent SPL in 1 mOe field (60Hz)
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Phantom Power
48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors.
BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.
Microphone: Matte black enamel brass case and stainless steel inner grille
Preamplifier: Matte black enamel finished steel
Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)
Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)
Net Weight
Microphone: 12 g (0.4 oz) less cable
Preamplifier: 96 g (3.4 oz)

All so Share On



Desktop View